Recommended Items
-
KSF GL850 DC | Electric Glass Lifter (300 kg / 8,7 m)
Electric glass lifter for vertical and overhead glazings. It is also an autonomous device supplied by a battery and with its equipment also a multi-purpose material lift for construction site or workshop.
Load capacity kg 300 Lifting height m 8.7 Basic height m 2.15 Weight kg 268 Counterweight (4 x 22,5 kg) kg 90 Length – Width (folded) mm 900×760 Length – Width (operating) mm 2220×1510 €11,500.00 excl. VATKSF GL850 DC | Electric Glass Lifter (300 kg / 8,7 m)
€11,500.00 excl. VAT -
KSF GRM250 | Jobsite Glass Lifter and glazing robot (250kg, 2.9 m)
·
Max. load capacity 250 kg Weight with set of
counterweight461 kg Counter weight
quantity
weight12
19 kg- Narrow turning radius
- Big ground clearance
- Perfect for small pro-duction facilities.
- Flexible head
- Manual winch with automatic brake
- Turnable cradle to 360° with 4 manual pump system (each load capacity 100 kg safety load 70 kg)
- For an easy transport, it is possible to assemble it on the job site
€8,600.00 – €11,100.00 excl. VATKSF GRM250 | Jobsite Glass Lifter and glazing robot (250kg, 2.9 m)
€8,600.00 – €11,100.00 excl. VAT -
KSF ES850 | Electric Material Lift 230 V (300 kg / 8,7 m)
Traglast kg 300 Hebehöhe (Lastgabel unten) m 8.10 Hebehöhe (Lastgabel oben) m 8.70 Abmessungen des Liftes
Transportmaβemm 920 x 750 Abmessungen des Liftes
Im Einsatzmm 2070 x 1700 Abmessungen der Lastgabel mm 640 x 560 Bau-/Ladehöhe (Lastgabel unten) mm 170 Bau-/Ladehöhe (Lastgabel oben) mm 600 Eigengewicht kg 240 - Operating electrical 230 V or 110 V
- Automatic anti-fall system
- Easy to store.
- Reversible fork
- Folding legs can be easily set-up in seconds and easy move to next work position or easy to store.
- Compact design, easy to move to next job
- Easily to load onto a pick-up truck.
- 250 mm wheels allow traverse rough ground terrain.
- Wheel base with lifting screw – 3 fonctions (design Upter) :
Parking device
For use on sloping ground
To restore easily the legs
€4,670.00 – €5,370.00 excl. VATKSF ES850 | Electric Material Lift 230 V (300 kg / 8,7 m)
€4,670.00 – €5,370.00 excl. VAT -
KSF BD400 | Electric material lifter (250 kg / 4 m)
Capacity Lifting height Weight 250 kg 4,1 m 100 kg - Mast with aluminium anti-torsions rails
- Immediate use on site, activated in seconds without tools
- Use possible on sloping ground thanks to the specific adjustment of the feet (in front the mast)
- Electric motor 230 V – 50 / 60 Hz (110 V also available)
- The variable speed control can be soft start or adjust the micro operating height.
- Emergency Stop Button, for stop raising / lowering immediately.
- Manual operation in case of power failure
- Automatic clutch breaker: prevent over weight loading
- Adjustable wheel base
€3,800.00 – €4,900.00 excl. VATKSF BD400 | Electric material lifter (250 kg / 4 m)
€3,800.00 – €4,900.00 excl. VAT -
KSF BD400 M | Electric portable glass lifter (250 kg / 4 m)
Max. load capacity Weight Height 250 kg 100 kg 4.3 m · Mast with aluminium anti-torsions rails
· Immediate use on site, activated in seconds without tools
· Use possible on sloping ground thanks to the specific adjustment of the feet (in front the mast)
· Electric motor 230 V – 50 / 60 Hz (110 V also available)
· The variable speed control can be soft start or adjust the micro operating height.
· Emergency Stop Button, for stop raising / lowering immediately.
· Manual operation in case of power failure
· Automatic clutch breaker: prevent over weight loading
· Adjustable wheel base
€3,800.00 – €4,900.00 excl. VATKSF BD400 M | Electric portable glass lifter (250 kg / 4 m)
€3,800.00 – €4,900.00 excl. VAT -
KSF CA400 GL | Electric Portable Glass Lifter for winter garten (120 kg, 4.20m)
Load capacity
with an angle of 80°Lifting
Height
(*)Dimension folded Dimension
operatingLift
weightCradle 120 kg / 4,2 m 4, 2 m 66 kg 550 x 650 mm 980 x 1010mm
1590 x 750 mm (***)20 kg Lifting machine
- No need to use any tools for the operation, it take only 30 seconds to complete machine set-up.
- Sliding rails for the capacity of 120 kg (for CA 400 GL)
- The overall stability is ensured by 4 feet equipped with locking wheels, for use also on sloping ground
- A level ensure the proper set-up while adjusting the feet
- Equipped with handle and transport wheels to move easily on site
- Can be transported by van or estate car
- Design Upter, to work close to the wall
Electric motor
- The electric lifting motor is 110 V or 220 V
- Electric remote control with variable speed switch.
- Manual operation is possible in case of power failure
- Automatic slipping clutch to prevent over weight loading
- Emergency stop button: Pressing this button stops raising or lowering immediately in case of emergency.
Cradle with vacuums
- Safety suction pump, diameter 200 mm (certified TÜV and GS) unit capacity 65 kg,
- a red line on the pump’s plumber serves as a vacuum indicator
- Designed for horizontal or vertical lifting (angle adjustment up to 90° for CA 400 GL)
- With 4 vacuums and outriggers for glass up to 4 m (for CA400GL)
€3,550.00 excl. VATKSF CA400 GL | Electric Portable Glass Lifter for winter garten (120 kg, 4.20m)
€3,550.00 excl. VAT
Best Seller Items
-
KSF GL850 DC | Electric Glass Lifter (300 kg / 8,7 m)
Electric glass lifter for vertical and overhead glazings. It is also an autonomous device supplied by a battery and with its equipment also a multi-purpose material lift for construction site or workshop.
Load capacity kg 300 Lifting height m 8.7 Basic height m 2.15 Weight kg 268 Counterweight (4 x 22,5 kg) kg 90 Length – Width (folded) mm 900×760 Length – Width (operating) mm 2220×1510 €11,500.00 excl. VATKSF GL850 DC | Electric Glass Lifter (300 kg / 8,7 m)
€11,500.00 excl. VAT -
KSF GRM250 | Jobsite Glass Lifter and glazing robot (250kg, 2.9 m)
·
Max. load capacity 250 kg Weight with set of
counterweight461 kg Counter weight
quantity
weight12
19 kg- Narrow turning radius
- Big ground clearance
- Perfect for small pro-duction facilities.
- Flexible head
- Manual winch with automatic brake
- Turnable cradle to 360° with 4 manual pump system (each load capacity 100 kg safety load 70 kg)
- For an easy transport, it is possible to assemble it on the job site
€8,600.00 – €11,100.00 excl. VATKSF GRM250 | Jobsite Glass Lifter and glazing robot (250kg, 2.9 m)
€8,600.00 – €11,100.00 excl. VAT -
KSF ES850 | Electric Material Lift 230 V (300 kg / 8,7 m)
Traglast kg 300 Hebehöhe (Lastgabel unten) m 8.10 Hebehöhe (Lastgabel oben) m 8.70 Abmessungen des Liftes
Transportmaβemm 920 x 750 Abmessungen des Liftes
Im Einsatzmm 2070 x 1700 Abmessungen der Lastgabel mm 640 x 560 Bau-/Ladehöhe (Lastgabel unten) mm 170 Bau-/Ladehöhe (Lastgabel oben) mm 600 Eigengewicht kg 240 - Operating electrical 230 V or 110 V
- Automatic anti-fall system
- Easy to store.
- Reversible fork
- Folding legs can be easily set-up in seconds and easy move to next work position or easy to store.
- Compact design, easy to move to next job
- Easily to load onto a pick-up truck.
- 250 mm wheels allow traverse rough ground terrain.
- Wheel base with lifting screw – 3 fonctions (design Upter) :
Parking device
For use on sloping ground
To restore easily the legs
€4,670.00 – €5,370.00 excl. VATKSF ES850 | Electric Material Lift 230 V (300 kg / 8,7 m)
€4,670.00 – €5,370.00 excl. VAT -
KSF BD400 | Electric material lifter (250 kg / 4 m)
Capacity Lifting height Weight 250 kg 4,1 m 100 kg - Mast with aluminium anti-torsions rails
- Immediate use on site, activated in seconds without tools
- Use possible on sloping ground thanks to the specific adjustment of the feet (in front the mast)
- Electric motor 230 V – 50 / 60 Hz (110 V also available)
- The variable speed control can be soft start or adjust the micro operating height.
- Emergency Stop Button, for stop raising / lowering immediately.
- Manual operation in case of power failure
- Automatic clutch breaker: prevent over weight loading
- Adjustable wheel base
€3,800.00 – €4,900.00 excl. VATKSF BD400 | Electric material lifter (250 kg / 4 m)
€3,800.00 – €4,900.00 excl. VAT -
KSF BD400 M | Electric portable glass lifter (250 kg / 4 m)
Max. load capacity Weight Height 250 kg 100 kg 4.3 m · Mast with aluminium anti-torsions rails
· Immediate use on site, activated in seconds without tools
· Use possible on sloping ground thanks to the specific adjustment of the feet (in front the mast)
· Electric motor 230 V – 50 / 60 Hz (110 V also available)
· The variable speed control can be soft start or adjust the micro operating height.
· Emergency Stop Button, for stop raising / lowering immediately.
· Manual operation in case of power failure
· Automatic clutch breaker: prevent over weight loading
· Adjustable wheel base
€3,800.00 – €4,900.00 excl. VATKSF BD400 M | Electric portable glass lifter (250 kg / 4 m)
€3,800.00 – €4,900.00 excl. VAT -
KSF CA400 GL | Electric Portable Glass Lifter for winter garten (120 kg, 4.20m)
Load capacity
with an angle of 80°Lifting
Height
(*)Dimension folded Dimension
operatingLift
weightCradle 120 kg / 4,2 m 4, 2 m 66 kg 550 x 650 mm 980 x 1010mm
1590 x 750 mm (***)20 kg Lifting machine
- No need to use any tools for the operation, it take only 30 seconds to complete machine set-up.
- Sliding rails for the capacity of 120 kg (for CA 400 GL)
- The overall stability is ensured by 4 feet equipped with locking wheels, for use also on sloping ground
- A level ensure the proper set-up while adjusting the feet
- Equipped with handle and transport wheels to move easily on site
- Can be transported by van or estate car
- Design Upter, to work close to the wall
Electric motor
- The electric lifting motor is 110 V or 220 V
- Electric remote control with variable speed switch.
- Manual operation is possible in case of power failure
- Automatic slipping clutch to prevent over weight loading
- Emergency stop button: Pressing this button stops raising or lowering immediately in case of emergency.
Cradle with vacuums
- Safety suction pump, diameter 200 mm (certified TÜV and GS) unit capacity 65 kg,
- a red line on the pump’s plumber serves as a vacuum indicator
- Designed for horizontal or vertical lifting (angle adjustment up to 90° for CA 400 GL)
- With 4 vacuums and outriggers for glass up to 4 m (for CA400GL)
€3,550.00 excl. VATKSF CA400 GL | Electric Portable Glass Lifter for winter garten (120 kg, 4.20m)
€3,550.00 excl. VAT
-
KSF GLS340 | Portable glass lifter for patio-roof (3.40m, 70 kg)
Load capacity
with an angle of 80°Lifting
Height
horizontalDimension folded Dimension
operatingLifter weight Cradle
weight70 kg / 3 m 3.4 m 300 x 300 mm 1000 x 1000 mm 24 kg 15 kg - No need to use any tools for the operation
- It take only 30 seconds to complete machine set-up.
- Telescoping masts
- The overall stability is ensured by 4 feet equipped with locking wheels for use also on sloping ground
- A level ensure the proper set-up while adjusting the feet
- Can be transported by van or estate car
- Electric lifting motor 110 V or 230 V , remote control with variable speed switch.
- Manual operation is possible in case of power failure
- Automatic Overload clutch, to prevent over weight loading
- Emergency stop button: Pressing this button stops raising or lowering immediately
Cradle with 2 vacuums
· Safety suction pump, diameter 200 mm (certified TÜV and GS) unit capacity 65 kg
A red line on the pump’s plumber serves as a vacuum indicator€2,270.00 excl. VATKSF GLS340 | Portable glass lifter for patio-roof (3.40m, 70 kg)
€2,270.00 excl. VAT -
KSF DW340 | Electrical Drywall Lifter (up to 3.3m)
- The distance of two arms up to 3,58 m to take sheets up to 4′ x 16′.
- It’s can be operate in horizontal, vertical and ceiling positioning.
- Vertical loading height without ground clearance.
- Mounted on wheels of caster with break for easily movement.
- Set-Up without tools : The legs can be release or fold in seconds without tools.
- Telescoping legs versatile and infinitely adjustment, available use in uneven ground, like stairway
- Electric remote control with variable speed switch
- The variable speed control can be soft start or adjust the micro operating height.
- Emergency Stop Button, for stop raising / lowering immediately in case of emergency.
- Manual operating in case of power failure.
- Completely portable, light weight design to easy carry and transport it.
- Telescoping Mast : constructed by heat treated, robust aluminum, compact and reliability.
- Automatic Overload breaker: it equipped to prevent to over weight loading.
- Voltage 230 V or 110 V – 50 / 60 Hz.
- Cradle load capacity : 70 kg – Cradle weight 12 kg
- Distance of two arms with outriggers 3,58 m
€1,760.00 excl. VATKSF DW340 | Electrical Drywall Lifter (up to 3.3m)
€1,760.00 excl. VAT -
Portable Electric Vacuum suction cup lifter (capacity: 170 kgs) for concrete, glass, stone, marble, wood, metal
Capacity 170 kgs (depending of the material lifted)
The Kemtech vacuum suction cup lifter is a portable electric suction cup lifter designed to be used by professionals in a wide variety of industry: Glass, flooring, construction, carpentry.
With a weight of only 1.5kgs, it is one of the lightest vacuum suction cup lifter in the market. This suction cup is extremely solid and can handle porous and uneven surface up to 170 kgs.
Net weight: 1.5kg
compatible: Glass, Metal, Plastic, Wood, Ceramic Tile, rough concrete, drywall, rough slate
€240.00 excl. VAT -
KSF CA400-P | Electric portable Lifter with platform (150 kg, 4 m)
Basic height Load capacity / Lifting height Weight Dimensions
operating990 mm 150 kg / 4 m 66 kg 550 x 650 mm - Constructed by heat treated, robust aluminum, compact, safety and reliability. Sliding rails for CA 400
- Set-Up without tools, the legs can be release or fold in seconds without tools.
- 4 Legs, versatile and infinitely adjustment, available use in uneven ground with special design can let you work close to the wall (design UPTER)
- The variable speed control can be soft start or adjust the micro operating height.
- Emergency Stop Button. Press the button for stop raising / lowering immediately.
- Manual operation incase of power failure
- Automatic slipping-clutch to prevent to over weight loading.
- Level to ensure the proper set-up while and adjusting the telescoping legs
- Equiped with handle and transport wheels
- Can be transported by van or estate car
€2,999.00 – €3,100.00 excl. VATKSF CA400-P | Electric portable Lifter with platform (150 kg, 4 m)
€2,999.00 – €3,100.00 excl. VAT -
Forks | compatible ML2
Forks | compatible ML2
€150.00 excl. VATForks | compatible ML2
€150.00 excl. VAT -
Platform | compatible ML2
Platform | compatible ML2
€150.00 excl. VATPlatform | compatible ML2
€150.00 excl. VAT -
EV-300 | Electro-Pneumatic Glass Cradle 300 kg | compatible GRM 250
The EV-300 electro-pneumatic glass cradle is an autonomous device intended for the handling of all glass on site or in the workshop.
Due to its design, it also adapts without modification to the GRM 250 glass robot replacing the manual pump suction cups.
In order to comply with regulations:
- Double air circuit (each circuit has its own supply).
- Each air circuit is connected to its set of suction cups (blue and red pipes)
- Double visual and audible alarm system in case of airdrop
- Double vacuum level indicator
300 mm diameter suction cups:
- With specific seals to limit the impact of the product on the glazing
- Adjustable position on each support arm (each arm is also adjustable on the structure)
- With individual protective cover
€2,550.00 excl. VATEV-300 | Electro-Pneumatic Glass Cradle 300 kg | compatible GRM 250
€2,550.00 excl. VAT -
Glass holder | compatible CA 400 GL
Glass holder | compatible CA 400 GL
€150.00 excl. VATGlass holder | compatible CA 400 GL
€150.00 excl. VAT -
Jib 80 kg for Glass cradle ( für Frontverglasung) | kompatibel CA 400 GL
Kranarm – 80 kg
für Frontverglasung€200.00 excl. VATJib 80 kg for Glass cradle ( für Frontverglasung) | kompatibel CA 400 GL
€200.00 excl. VAT -
Pipe cradle | compatible ES850
Pipe cradle | compatible ES850
€800.00 excl. VATPipe cradle | compatible ES850
€800.00 excl. VAT -
Platform | compatible lifters KSF CM270, CM340, CM520, CA 400 P, CA 400 GL
compatible lifters KSF CM270, CM340, CM520, CA 400 P, CA 400 GL
Plattform – lifting weight 150 kg
750 x 450 mm€320.00 excl. VAT -
Platform | compatible lifters KSF BD400, BD1, BD2
Platform | compatible lifters KSF BD400, BD1, BD2
€300.00 excl. VATPlatform | compatible lifters KSF BD400, BD1, BD2
€300.00 excl. VAT