Recommended Items
-
KSF GL850 DC | Electric Glass Lifter (300 kg / 8,7 m)
Electric glass lifter for vertical and overhead glazings. It is also an autonomous device supplied by a battery and with its equipment also a multi-purpose material lift for construction site or workshop.
Load capacity kg 300 Lifting height m 8.7 Basic height m 2.15 Weight kg 268 Counterweight (4 x 22,5 kg) kg 90 Length – Width (folded) mm 900×760 Length – Width (operating) mm 2220×1510 €11,500.00 excl. VATKSF GL850 DC | Electric Glass Lifter (300 kg / 8,7 m)
€11,500.00 excl. VAT -
KSF GRM250 | Jobsite Glass Lifter and glazing robot (250kg, 2.9 m)
·
Max. load capacity 250 kg Weight with set of
counterweight461 kg Counter weight
quantity
weight12
19 kg- Narrow turning radius
- Big ground clearance
- Perfect for small pro-duction facilities.
- Flexible head
- Manual winch with automatic brake
- Turnable cradle to 360° with 4 manual pump system (each load capacity 100 kg safety load 70 kg)
- For an easy transport, it is possible to assemble it on the job site
€8,600.00 – €11,100.00 excl. VATKSF GRM250 | Jobsite Glass Lifter and glazing robot (250kg, 2.9 m)
€8,600.00 – €11,100.00 excl. VAT -
KSF ES850 | Electric Material Lift 230 V (300 kg / 8,7 m)
Traglast kg 300 Hebehöhe (Lastgabel unten) m 8.10 Hebehöhe (Lastgabel oben) m 8.70 Abmessungen des Liftes
Transportmaβemm 920 x 750 Abmessungen des Liftes
Im Einsatzmm 2070 x 1700 Abmessungen der Lastgabel mm 640 x 560 Bau-/Ladehöhe (Lastgabel unten) mm 170 Bau-/Ladehöhe (Lastgabel oben) mm 600 Eigengewicht kg 240 - Operating electrical 230 V or 110 V
- Automatic anti-fall system
- Easy to store.
- Reversible fork
- Folding legs can be easily set-up in seconds and easy move to next work position or easy to store.
- Compact design, easy to move to next job
- Easily to load onto a pick-up truck.
- 250 mm wheels allow traverse rough ground terrain.
- Wheel base with lifting screw – 3 fonctions (design Upter) :
Parking device
For use on sloping ground
To restore easily the legs
€4,670.00 – €5,370.00 excl. VATKSF ES850 | Electric Material Lift 230 V (300 kg / 8,7 m)
€4,670.00 – €5,370.00 excl. VAT -
KSF BD400 | Electric material lifter (250 kg / 4 m)
Capacity Lifting height Weight 250 kg 4,1 m 100 kg - Mast with aluminium anti-torsions rails
- Immediate use on site, activated in seconds without tools
- Use possible on sloping ground thanks to the specific adjustment of the feet (in front the mast)
- Electric motor 230 V – 50 / 60 Hz (110 V also available)
- The variable speed control can be soft start or adjust the micro operating height.
- Emergency Stop Button, for stop raising / lowering immediately.
- Manual operation in case of power failure
- Automatic clutch breaker: prevent over weight loading
- Adjustable wheel base
€3,800.00 – €4,900.00 excl. VATKSF BD400 | Electric material lifter (250 kg / 4 m)
€3,800.00 – €4,900.00 excl. VAT -
KSF BD400 M | Electric portable glass lifter (250 kg / 4 m)
Max. load capacity Weight Height 250 kg 100 kg 4.3 m · Mast with aluminium anti-torsions rails
· Immediate use on site, activated in seconds without tools
· Use possible on sloping ground thanks to the specific adjustment of the feet (in front the mast)
· Electric motor 230 V – 50 / 60 Hz (110 V also available)
· The variable speed control can be soft start or adjust the micro operating height.
· Emergency Stop Button, for stop raising / lowering immediately.
· Manual operation in case of power failure
· Automatic clutch breaker: prevent over weight loading
· Adjustable wheel base
€3,800.00 – €4,900.00 excl. VATKSF BD400 M | Electric portable glass lifter (250 kg / 4 m)
€3,800.00 – €4,900.00 excl. VAT -
KSF CA400 GL | Electric Portable Glass Lifter for winter garten (120 kg, 4.20m)
Load capacity
with an angle of 80°Lifting
Height
(*)Dimension folded Dimension
operatingLift
weightCradle 120 kg / 4,2 m 4, 2 m 66 kg 550 x 650 mm 980 x 1010mm
1590 x 750 mm (***)20 kg Lifting machine
- No need to use any tools for the operation, it take only 30 seconds to complete machine set-up.
- Sliding rails for the capacity of 120 kg (for CA 400 GL)
- The overall stability is ensured by 4 feet equipped with locking wheels, for use also on sloping ground
- A level ensure the proper set-up while adjusting the feet
- Equipped with handle and transport wheels to move easily on site
- Can be transported by van or estate car
- Design Upter, to work close to the wall
Electric motor
- The electric lifting motor is 110 V or 220 V
- Electric remote control with variable speed switch.
- Manual operation is possible in case of power failure
- Automatic slipping clutch to prevent over weight loading
- Emergency stop button: Pressing this button stops raising or lowering immediately in case of emergency.
Cradle with vacuums
- Safety suction pump, diameter 200 mm (certified TÜV and GS) unit capacity 65 kg,
- a red line on the pump’s plumber serves as a vacuum indicator
- Designed for horizontal or vertical lifting (angle adjustment up to 90° for CA 400 GL)
- With 4 vacuums and outriggers for glass up to 4 m (for CA400GL)
€3,550.00 excl. VATKSF CA400 GL | Electric Portable Glass Lifter for winter garten (120 kg, 4.20m)
€3,550.00 excl. VAT
Best Seller Items
-
KSF GL850 DC | Electric Glass Lifter (300 kg / 8,7 m)
Electric glass lifter for vertical and overhead glazings. It is also an autonomous device supplied by a battery and with its equipment also a multi-purpose material lift for construction site or workshop.
Load capacity kg 300 Lifting height m 8.7 Basic height m 2.15 Weight kg 268 Counterweight (4 x 22,5 kg) kg 90 Length – Width (folded) mm 900×760 Length – Width (operating) mm 2220×1510 €11,500.00 excl. VATKSF GL850 DC | Electric Glass Lifter (300 kg / 8,7 m)
€11,500.00 excl. VAT -
KSF GRM250 | Jobsite Glass Lifter and glazing robot (250kg, 2.9 m)
·
Max. load capacity 250 kg Weight with set of
counterweight461 kg Counter weight
quantity
weight12
19 kg- Narrow turning radius
- Big ground clearance
- Perfect for small pro-duction facilities.
- Flexible head
- Manual winch with automatic brake
- Turnable cradle to 360° with 4 manual pump system (each load capacity 100 kg safety load 70 kg)
- For an easy transport, it is possible to assemble it on the job site
€8,600.00 – €11,100.00 excl. VATKSF GRM250 | Jobsite Glass Lifter and glazing robot (250kg, 2.9 m)
€8,600.00 – €11,100.00 excl. VAT -
KSF ES850 | Electric Material Lift 230 V (300 kg / 8,7 m)
Traglast kg 300 Hebehöhe (Lastgabel unten) m 8.10 Hebehöhe (Lastgabel oben) m 8.70 Abmessungen des Liftes
Transportmaβemm 920 x 750 Abmessungen des Liftes
Im Einsatzmm 2070 x 1700 Abmessungen der Lastgabel mm 640 x 560 Bau-/Ladehöhe (Lastgabel unten) mm 170 Bau-/Ladehöhe (Lastgabel oben) mm 600 Eigengewicht kg 240 - Operating electrical 230 V or 110 V
- Automatic anti-fall system
- Easy to store.
- Reversible fork
- Folding legs can be easily set-up in seconds and easy move to next work position or easy to store.
- Compact design, easy to move to next job
- Easily to load onto a pick-up truck.
- 250 mm wheels allow traverse rough ground terrain.
- Wheel base with lifting screw – 3 fonctions (design Upter) :
Parking device
For use on sloping ground
To restore easily the legs
€4,670.00 – €5,370.00 excl. VATKSF ES850 | Electric Material Lift 230 V (300 kg / 8,7 m)
€4,670.00 – €5,370.00 excl. VAT -
KSF BD400 | Electric material lifter (250 kg / 4 m)
Capacity Lifting height Weight 250 kg 4,1 m 100 kg - Mast with aluminium anti-torsions rails
- Immediate use on site, activated in seconds without tools
- Use possible on sloping ground thanks to the specific adjustment of the feet (in front the mast)
- Electric motor 230 V – 50 / 60 Hz (110 V also available)
- The variable speed control can be soft start or adjust the micro operating height.
- Emergency Stop Button, for stop raising / lowering immediately.
- Manual operation in case of power failure
- Automatic clutch breaker: prevent over weight loading
- Adjustable wheel base
€3,800.00 – €4,900.00 excl. VATKSF BD400 | Electric material lifter (250 kg / 4 m)
€3,800.00 – €4,900.00 excl. VAT -
KSF BD400 M | Electric portable glass lifter (250 kg / 4 m)
Max. load capacity Weight Height 250 kg 100 kg 4.3 m · Mast with aluminium anti-torsions rails
· Immediate use on site, activated in seconds without tools
· Use possible on sloping ground thanks to the specific adjustment of the feet (in front the mast)
· Electric motor 230 V – 50 / 60 Hz (110 V also available)
· The variable speed control can be soft start or adjust the micro operating height.
· Emergency Stop Button, for stop raising / lowering immediately.
· Manual operation in case of power failure
· Automatic clutch breaker: prevent over weight loading
· Adjustable wheel base
€3,800.00 – €4,900.00 excl. VATKSF BD400 M | Electric portable glass lifter (250 kg / 4 m)
€3,800.00 – €4,900.00 excl. VAT -
KSF CA400 GL | Electric Portable Glass Lifter for winter garten (120 kg, 4.20m)
Load capacity
with an angle of 80°Lifting
Height
(*)Dimension folded Dimension
operatingLift
weightCradle 120 kg / 4,2 m 4, 2 m 66 kg 550 x 650 mm 980 x 1010mm
1590 x 750 mm (***)20 kg Lifting machine
- No need to use any tools for the operation, it take only 30 seconds to complete machine set-up.
- Sliding rails for the capacity of 120 kg (for CA 400 GL)
- The overall stability is ensured by 4 feet equipped with locking wheels, for use also on sloping ground
- A level ensure the proper set-up while adjusting the feet
- Equipped with handle and transport wheels to move easily on site
- Can be transported by van or estate car
- Design Upter, to work close to the wall
Electric motor
- The electric lifting motor is 110 V or 220 V
- Electric remote control with variable speed switch.
- Manual operation is possible in case of power failure
- Automatic slipping clutch to prevent over weight loading
- Emergency stop button: Pressing this button stops raising or lowering immediately in case of emergency.
Cradle with vacuums
- Safety suction pump, diameter 200 mm (certified TÜV and GS) unit capacity 65 kg,
- a red line on the pump’s plumber serves as a vacuum indicator
- Designed for horizontal or vertical lifting (angle adjustment up to 90° for CA 400 GL)
- With 4 vacuums and outriggers for glass up to 4 m (for CA400GL)
€3,550.00 excl. VATKSF CA400 GL | Electric Portable Glass Lifter for winter garten (120 kg, 4.20m)
€3,550.00 excl. VAT
-
KSF SGT2 – Glass lifter transporter (120 kg)
With the glass lifter SGT2, glass panes of up to 120 kg can be lifted and moved safely.
The SGT2 glass transporter is an aid for loading, unloading and transporting glass. The rotatable suction cup holder allows glass panes up to 280 cm in size to be rotated 360 °. In addition, the mast can be swiveled by 90 °. In this way, glass panes can also be transported lengthways. The SGT2 with a glass pane fits through
80 cm narrow doors. The mast of the SGT2 glass plate lifter can be tilted forward by 15 °. This function makes it easier to lift glass panes out of a frame.
This device improves ergonomics and increases safety in the workplace. The SGT2 is an important aid when transporting large, heavy glass panes. Indispensable for every glazier.Additional advantages :
- Manuel winch with automatic brake
- Smooth-running cable winch for lifting and lowering
- Stable mast for safe riding
- Large vacuum cups for a secure hold of heavy glass panes
- Rotatable traverse enables longitudinal transport
- Mast can be tilted forwards to lift glass panes out of a frame
- Puncture-proof, large 300 mm wheels for every surface
€1,590.00 – €2,830.00 excl. VATKSF SGT2 – Glass lifter transporter (120 kg)
€1,590.00 – €2,830.00 excl. VAT -
DW Drywall lifter outrigger | compatible KSF CM340, CM520
Extension DW Drywall lifter | compatible KSF CM340, CM520
€320.00 excl. VATDW Drywall lifter outrigger | compatible KSF CM340, CM520
€320.00 excl. VAT -
Glass cradle G-LS 130 kg for CM340, CM520, CA400, BD400
Glass cradle G-LS 130 kg for CM340, CM520, CA400, BD400
€850.00 excl. VATGlass cradle G-LS 130 kg for CM340, CM520, CA400, BD400
€850.00 excl. VAT -
Platform outrigger for CM270, CM340, CM520
Platform outrigger for CM270, CM340, CM520
Dimensions: 2 x 380 mm
€140.00 excl. VATPlatform outrigger for CM270, CM340, CM520
€140.00 excl. VAT -
KSF ML2 | Foldable Hand Truck / trolley and lifter with fork or platform (150kg, 1.05 m)
The ML2 is a foldable professional hand truck lifter trolley equipped with various accessories :
· Platform 120kg,
· Fork 150 kg- Made from aluminum, with a single compact and reliable mast.
- Detachable holder : platform or fork
- Foldable design for ease of transporting in vans and trucks, and for storing on shelves or benches.
- Cable is hidden inside the mast, preventing injury.
- Solid wheels (250 mm / 10 inch).
- Ready to use in 30 seconds
It can be used anywhere where traditional transporting and lifting is required.
€960.00 – €1,070.00 excl. VATKSF ML2 | Foldable Hand Truck / trolley and lifter with fork or platform (150kg, 1.05 m)
€960.00 – €1,070.00 excl. VAT -
KSF BD2 | Multi-purpose foldable material lifter (180 kg, 3.80m)
- Aluminium mast (anti-twist rails) with steel pulleys
- Immediate use on site
- Removable feet for easy transport in vehicle
- Manual winch with automatic brake and special lifting steel wire
- Easy transport on site
- Legs with swivel wheels Ø 76 mm and provided with a brake
- Two wheels Ø 250 mm with adjustable wheels base up to 1060 mm for improved stability with load
- Blocking mast during transport in vehicle
Included:
- Adjustable lifting fork
Optional Lifting accessories :
- Jib and hook
- Platform for Beam or roller shutter carrier
- Glass cradles up to 250 KG (Jib included)
€1,960.00 – €3,060.00 excl. VATKSF BD2 | Multi-purpose foldable material lifter (180 kg, 3.80m)
€1,960.00 – €3,060.00 excl. VAT -
KSF CA400 GL | Electric Portable Glass Lifter for winter garten (120 kg, 4.20m)
Load capacity
with an angle of 80°Lifting
Height
(*)Dimension folded Dimension
operatingLift
weightCradle 120 kg / 4,2 m 4, 2 m 66 kg 550 x 650 mm 980 x 1010mm
1590 x 750 mm (***)20 kg Lifting machine
- No need to use any tools for the operation, it take only 30 seconds to complete machine set-up.
- Sliding rails for the capacity of 120 kg (for CA 400 GL)
- The overall stability is ensured by 4 feet equipped with locking wheels, for use also on sloping ground
- A level ensure the proper set-up while adjusting the feet
- Equipped with handle and transport wheels to move easily on site
- Can be transported by van or estate car
- Design Upter, to work close to the wall
Electric motor
- The electric lifting motor is 110 V or 220 V
- Electric remote control with variable speed switch.
- Manual operation is possible in case of power failure
- Automatic slipping clutch to prevent over weight loading
- Emergency stop button: Pressing this button stops raising or lowering immediately in case of emergency.
Cradle with vacuums
- Safety suction pump, diameter 200 mm (certified TÜV and GS) unit capacity 65 kg,
- a red line on the pump’s plumber serves as a vacuum indicator
- Designed for horizontal or vertical lifting (angle adjustment up to 90° for CA 400 GL)
- With 4 vacuums and outriggers for glass up to 4 m (for CA400GL)
€3,550.00 excl. VATKSF CA400 GL | Electric Portable Glass Lifter for winter garten (120 kg, 4.20m)
€3,550.00 excl. VAT -
KSF BD1 | Multi-purpose foldable material lift (180 kg, 3m)
Load capacity up to 3 m 180 kg Weight without accessories 60 kg Lifting height
with load fork above
mit load fork under
with platform2.88 m
3.35 m
3 m- Aluminium mast (anti-twist rails) with steel pulleys
- Immediate use on site
- Removable feet for easy transport in vehicle
- Manual winch with automatic brake and special lifting steel wire
- Easy transport on site
- Legs with swivel wheels Ø 76 mm and provided with a brake
- Two wheels Ø 250 mm with adjustable wheels base up to 1060 mm for improved stability with load
- Blocking mast during transport in vehicle
Included:
- Adjustable lifting fork
Optional Lifting accessories :
- Hook
- Platform for Beam or roller shutter carrier
- Glass cradle up to 180 kg
€1,490.00 – €1,740.00 excl. VATKSF BD1 | Multi-purpose foldable material lift (180 kg, 3m)
€1,490.00 – €1,740.00 excl. VAT -
-
Crane jib | compatible BD1 und BD2
Crane jib | compatible BD1 und BD2
€240.00 excl. VATCrane jib | compatible BD1 und BD2
€240.00 excl. VAT -
KSF CM340 | HVAC / air conditionner lifter (up to 3.30 m, up to 130 kg)
Basic
heightLifting
heightLoad
capacityWeight
mastDimensions
foldedDimensions
operating970 mm 3,3 m 130 kg / 3,0 m
120 kg / 3,3 m21 kg 300 x 300 mm 1,1 x 1,1 m - Constructed by heat treated, robust aluminum, compact, safety and reliability.
- Set-Up without tools, the legs can be release or fold in seconds without tools.
- 4 Legs, versatile and infinitely adjustment, available use in uneven ground with special design can let you working close to the wall (design UPTER)
- The variable speed control can be soft start or adjust the micro operating height.
- Emergency Stop Button, for stop raising / lowering immediately.
- Manual operation incase of power failure
- Automatic clutch breaker: it equipped to prevent to over weight loading.
- Level to ensure the proper set-up while and adjusting the telescoping legs
- Optional transport wheels and platform extension
- Carry bags included
€1,250.00 – €1,450.00 excl. VATKSF CM340 | HVAC / air conditionner lifter (up to 3.30 m, up to 130 kg)
€1,250.00 – €1,450.00 excl. VAT -
KSF BD400 M | Electric portable glass lifter (250 kg / 4 m)
Max. load capacity Weight Height 250 kg 100 kg 4.3 m · Mast with aluminium anti-torsions rails
· Immediate use on site, activated in seconds without tools
· Use possible on sloping ground thanks to the specific adjustment of the feet (in front the mast)
· Electric motor 230 V – 50 / 60 Hz (110 V also available)
· The variable speed control can be soft start or adjust the micro operating height.
· Emergency Stop Button, for stop raising / lowering immediately.
· Manual operation in case of power failure
· Automatic clutch breaker: prevent over weight loading
· Adjustable wheel base
€3,800.00 – €4,900.00 excl. VATKSF BD400 M | Electric portable glass lifter (250 kg / 4 m)
€3,800.00 – €4,900.00 excl. VAT