-
Ventosa elettrica portatile (portata: 170 kg) per calcestruzzo, vetro, pietra, marmo, legno, metallo1 × €240.00
Subtotal: €240.00
Electric glass lifter for vertical and overhead glazings. It is also an autonomous device supplied by a battery and with its equipment also a multi-purpose material lift for construction site or workshop.
Load capacity | kg | 300 |
Lifting height | m | 8.7 |
Basic height | m | 2.15 |
Weight | kg | 268 |
Counterweight (4 x 22,5 kg) | kg | 90 |
Length – Width (folded) | mm | 900×760 |
Length – Width (operating) | mm | 2220×1510 |
·
Max. load capacity | 250 kg |
Weight with set of counterweight |
461 kg |
Counter weight quantity weight |
12 19 kg |
Traglast | kg | 300 |
Hebehöhe (Lastgabel unten) | m | 8.10 |
Hebehöhe (Lastgabel oben) | m | 8.70 |
Abmessungen des Liftes Transportmaβe |
mm | 920 x 750 |
Abmessungen des Liftes Im Einsatz |
mm | 2070 x 1700 |
Abmessungen der Lastgabel | mm | 640 x 560 |
Bau-/Ladehöhe (Lastgabel unten) | mm | 170 |
Bau-/Ladehöhe (Lastgabel oben) | mm | 600 |
Eigengewicht | kg | 240 |
Capacity | Lifting height | Weight |
250 kg | 4,1 m | 100 kg |
Max. load capacity | Weight | Height |
250 kg | 100 kg | 4.3 m |
· Mast with aluminium anti-torsions rails
· Immediate use on site, activated in seconds without tools
· Use possible on sloping ground thanks to the specific adjustment of the feet (in front the mast)
· Electric motor 230 V – 50 / 60 Hz (110 V also available)
· The variable speed control can be soft start or adjust the micro operating height.
· Emergency Stop Button, for stop raising / lowering immediately.
· Manual operation in case of power failure
· Automatic clutch breaker: prevent over weight loading
· Adjustable wheel base
Load capacity with an angle of 80° |
Lifting Height (*) |
Dimension folded | Dimension operating |
Lift weight |
Cradle |
120 kg / 4,2 m | 4, 2 m | 66 kg | 550 x 650 mm | 980 x 1010mm 1590 x 750 mm (***) |
20 kg |
Lifting machine
Electric motor
Cradle with vacuums
Electric glass lifter for vertical and overhead glazings. It is also an autonomous device supplied by a battery and with its equipment also a multi-purpose material lift for construction site or workshop.
Load capacity | kg | 300 |
Lifting height | m | 8.7 |
Basic height | m | 2.15 |
Weight | kg | 268 |
Counterweight (4 x 22,5 kg) | kg | 90 |
Length – Width (folded) | mm | 900×760 |
Length – Width (operating) | mm | 2220×1510 |
·
Max. load capacity | 250 kg |
Weight with set of counterweight |
461 kg |
Counter weight quantity weight |
12 19 kg |
Traglast | kg | 300 |
Hebehöhe (Lastgabel unten) | m | 8.10 |
Hebehöhe (Lastgabel oben) | m | 8.70 |
Abmessungen des Liftes Transportmaβe |
mm | 920 x 750 |
Abmessungen des Liftes Im Einsatz |
mm | 2070 x 1700 |
Abmessungen der Lastgabel | mm | 640 x 560 |
Bau-/Ladehöhe (Lastgabel unten) | mm | 170 |
Bau-/Ladehöhe (Lastgabel oben) | mm | 600 |
Eigengewicht | kg | 240 |
Capacity | Lifting height | Weight |
250 kg | 4,1 m | 100 kg |
Max. load capacity | Weight | Height |
250 kg | 100 kg | 4.3 m |
· Mast with aluminium anti-torsions rails
· Immediate use on site, activated in seconds without tools
· Use possible on sloping ground thanks to the specific adjustment of the feet (in front the mast)
· Electric motor 230 V – 50 / 60 Hz (110 V also available)
· The variable speed control can be soft start or adjust the micro operating height.
· Emergency Stop Button, for stop raising / lowering immediately.
· Manual operation in case of power failure
· Automatic clutch breaker: prevent over weight loading
· Adjustable wheel base
Load capacity with an angle of 80° |
Lifting Height (*) |
Dimension folded | Dimension operating |
Lift weight |
Cradle |
120 kg / 4,2 m | 4, 2 m | 66 kg | 550 x 650 mm | 980 x 1010mm 1590 x 750 mm (***) |
20 kg |
Lifting machine
Electric motor
Cradle with vacuums
Platform outrigger for CM270, CM340, CM520
Dimensions: 2 x 380 mm
5 wheels to facilitate the transport of your CM340 lifter and make your installation smoother
Glass holder | compatible CA 400 GL
Platform | compatible ML2
Forks | compatible ML2
Kranarm – 80 kg
für Frontverglasung
Crane jib | compatible BD1 und BD2
Capacity 170 kgs (depending of the material lifted)
The Kemtech vacuum suction cup lifter is a portable electric suction cup lifter designed to be used by professionals in a wide variety of industry: Glass, flooring, construction, carpentry.
With a weight of only 1.5kgs, it is one of the lightest vacuum suction cup lifter in the market. This suction cup is extremely solid and can handle porous and uneven surface up to 170 kgs.
Net weight: 1.5kg
compatible: Glass, Metal, Plastic, Wood, Ceramic Tile, rough concrete, drywall, rough slate
Platform | compatible lifters KSF BD400, BD1, BD2
compatible lifters KSF CM270, CM340, CM520, CA 400 P, CA 400 GL
Plattform – lifting weight 150 kg
750 x 450 mm
Extension DW Drywall lifter | compatible KSF CM340, CM520