professional lifters for HVAC, Heating, ventilation, and air conditioning

  • KSF CM439 | Electric lifter for awnings, HVAC, pergola, materials, renovation (130 kg / 3 m – 90 kg / 4.3 m)

    Electric lifter for pergola, HVAC, materials … up to a weight of 130kg (3m) and up to an height of 4.3m (90 kg) It can be used specifically for your renovation work and accelerates by 80% your installation time. Can be used by a single person and easily stored in a vehicle.

    Basic
    height
    Lifting
    height
    Load
    capacity
    Machine Weight
    mast
    1150 mm 4,27 m 130 kg / 3 m
    120 kg / 4 m
    90 kg / 4,3 m
    26 kg
    1,450.001,560.00 excl. VAT
  • KSF CA400-P | Electric portable Lifter with platform (150 kg, 4 m)

    Basic height Load capacity / Lifting height Weight Dimensions
    operating
    990 mm 150 kg / 4 m 66 kg 550 x 650 mm

     

    • Constructed by heat treated, robust aluminum, compact, safety and reliability. Sliding rails for CA 400
    • Set-Up without tools, the legs can be release or fold in seconds without tools.
    • 4 Legs, versatile and infinitely adjustment, available use in uneven ground with special design can let you work close to the wall (design UPTER)
    • The variable speed control can be soft start or adjust the micro operating height.
    • Emergency Stop Button. Press the button for stop raising / lowering immediately.
    • Manual operation incase of power failure
    • Automatic slipping-clutch to prevent to over weight loading.
    • Level to ensure the proper set-up while and adjusting the telescoping legs
    • Equiped with handle and transport wheels
    • Can be transported by van or estate car
    2,550.002,660.00 excl. VAT
  • KSF CM270 | Electric Lifter (120 kg / 2,6 m) – Lighter lifter in the world

    Lifting height Capacity Weight of the device Dimension folded Dimension opened
    2.6 m 120 kg 14 kg 150 x 150 mm 680 x 730 mm

     

    With a weight of only 14 kg it is the lightest assembly lifter in the world.

    • Aluminum mast (telescopic mast)
    • The device can be set up in seconds without tools.
    • Motor 230 V – electric remote control with variable speed.
    • Emergency stop button, the lifting job is interrupted immediately.
    • Manual operation possible in the event of a power failure using the handle.
    • Automatic clutch
    • 360 ° rotating platform with screw for blocking
    • Platform 750 x 440 mm / 5 kg
    1,100.00 excl. VAT
  • KSF CM340 | HVAC / air conditionner lifter (up to 3.30 m, up to 130 kg)

    Basic
    height
    Lifting
    height
    Load
    capacity
    Weight
    mast
    Dimensions
    folded
    Dimensions
    operating
    970 mm 3,3 m 130 kg / 3,0 m
    120 kg / 3,3 m
    21 kg 300 x 300 mm 1,1 x 1,1 m

     

    • Constructed by heat treated, robust aluminum, compact, safety and reliability.
    • Set-Up without tools, the legs can be release or fold in seconds without tools.
    • 4 Legs, versatile and infinitely adjustment, available use in uneven ground with special design can let you working close to the wall (design UPTER)
    •  The variable speed control can be soft start or adjust the micro operating height.
    • Emergency Stop Button, for stop raising / lowering immediately.
    • Manual operation incase of power failure
    • Automatic clutch breaker: it equipped to prevent to over weight loading.
    • Level to ensure the proper set-up while and adjusting the telescoping legs
    • Optional transport wheels and platform extension
    • Carry bags included
    1,310.001,510.00 excl. VAT
  • KSF AL330 | Portable lifter (110 kg /3,3 m)

    Capacity 110 kg
    Weight – Mast
    Weight – Platform
    41 kg
    5,8 kg
    Lifting height 3,3 m
    Platform 770 x 460 mm
    Steel wire Ø 5 mm

     

    • Anti-torsion steel mast
    • Steel pulleys
    • Immediate use on job site
    • Manual winch with automatic brake
    • Easy transportation in any vehicle
    • Feet with wheel Ø 100 mm, swivel and equipped with a brake
    • Carry handle
    • Four transport wheels including two swivel
    • With platform

     

    Some featrures :

    •   Winch with sprocket cover
    •   Precision mechanics with bronze rings
    •   For the safety the winch is far away from the mast, the user is thus not under the load
    750.00 excl. VAT
  • KSF CM520 | Electric portable lifter for HVAC (up to 4.90 m, up to 140 kg)

    • Basic
      height
      Lifting
      height
      Load
      capacity
      Weight
      mast
      Dimensions
      folded
      Dimensions
      operating
      1120 mm 4,9 m 140 kg / 3 m
      130 kg / 4 m
      90 kg / 4,9 m
      38 kg 380 x 380 mm 1,4 x 1,4 m

       

      • Constructed by heat treated, robust aluminum, compact, safety and reliability.
      • Set-Up without tools, the legs can be release or fold in seconds without tools.
      • 4 Legs, versatile and infinitely adjustment, available use in uneven ground with special design can let you working close to the wall (design UPTER)
      •  The variable speed control can be soft start or adjust the micro operating height.
      • Emergency Stop Button, for stop raising / lowering immediately.
      • Manual operation incase of power failure
      • Automatic clutch breaker: it equipped to prevent to over weight loading.
      • Level to ensure the proper set-up while and adjusting the telescoping legs
      • Optional platform extension
      • Carry bags and transport wheels included
    1,559.001,669.00 excl. VAT

KSF Tools